Gbs-elektronik MCA-527 Firmware Commands Manuel d'utilisateur télécharger pdf (Page 13)

Description of the MCA527 Firmware Commands

Command name CMD_SET_FLAT_TOP_TIME

Compatibility New MCA527 command.

Execution right Necessary

Description The command sets the flattop time (ftt = 0 … 50 * 0.1 µs).

The command is ignored and responds with an error value if a measurement is still running.

Format integer integer integer long integer

Parameter preamble command ftt 0 end flag

Byte string (HEX) A5 5A 13 01 ftt 00 00 00 00 00 B9 9B

Command name

CMD_SET_JITTER_CORRECTION

Compatibility New MCA527 command.

Execution right Necessary

Description The command sets the jitter correction.

jc = 0 turns jitter correction off

jc ≠ 0 turns jitter correction on

The command is not standardly handled. It is only handled if the flag

FEATURES_JITTER_CORRECTION is set within the value “MCA features” that is returned by

CMD_QUERY_STATE527, byte offset 8.

The command is ignored and responds with an error value if a measurement is still running.

Format integer integer integer long integer

Parameter preamble command jc 0 end flag

Byte string (HEX) A5 5A 16 01 jc 00 00 00 00 00 B9 9B

Command name

CMD_SET_BASELINE_RESTORING

Compatibility New MCA527 command.

Execution right Necessary

Description The command sets the baseline restorer.

blr = 0 off

blr = 1 1/1

blr = 2 1/2

blr = 3 1/4

blr = 4 1/8

blr = 5 1/16

blr = 6 1/32

The command is not standardly handled. It is only handled if the flag

FEATURES_ADJUSTABLE_BASELINE_RESTORER is set within the value “MCA features” that is

returned by CMD_QUERY_STATE527, byte offset 8.

The command is ignored and responds with an error value if a measurement is still running.

Format integer integer integer long integer

Parameter preamble command blr 0 end flag

Byte string (HEX) A5 5A 18 01 blr 00 00 00 00 00 B9 9B

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Pas de commentaire

Gbs-elektronik MCA-527 Firmware Commands Manuel d'utilisateur Page 13